Search results for: 'heat'

• 30% Recycled Content
• Not suitable for food use
• Perfect for using with heat sealers

Learn More

 

• Contains 30% Recycled content
• Not suitable for food use.
• Price per pack.
• Range of sizes.

  

Learn More

• Infinite Seal Length
• 10mm Seal Width
• Please be aware, lead times can vary on this product. 

Learn More

• Infinite Seal Length
• 10mm Seal Width
• Please be aware, lead times can vary on this product. 

Learn More

• Suitable for use with powder, solids, liquids and granulates
• L2025 x W1320 x H1845mm
• Weight 450Kg

Learn More

• For use with Audion Sealers - Ecosealer and Sealkid
• 7-10 Day Lead Time

Learn More

• Can seal 2 x 150 Micron.
• Range of optional accessories.
• Auto releases when seal cycle complete. 
• 7-10 day Lead Time

Learn More

• 125mu Thickness.
• Price per roll.
• Made in the UK.
• 3 Sizes available.

 

Learn More

 

• 50 Masks per box
• Price is per box.
• Certified EN149:2001 + A1:2009

 

 

Learn More

• Individually boxed coils, price per roll
• Spot welded at beginning and end.

Learn More

• Made in the UK
• Produce your own bubble bags

Learn More

 

• 117 micron (Performs as 125 Micron)
• Suitable for food use.
• Price per pack.
• Range of sizes.

 

Learn More

• 58 micron (Performs as 62.5 Micron)
• Price per pack.
• Suitable for food use.
• Range of sizes.

   

   

Learn More

• Sold in 4 gauges.
• Sizes of 1 to 24 inches.
• Perfect for using with heat sealers.

Learn More

• Widths between 200 - 500mm.
• Available with or without cutter.
• Applies 2mm seal.
• Seals up to 2 x 600 gauge layers.
• Spares Included.
• 12 Month return to base warranty.
• Suitable for use with our Polythene Bags.
• CE Standard.

Learn More

• Home compostable bag
• Complies with EN 13232
• 20 Microns thick
• Colour of the bag is cloudy.

Please note, due to the shelf life of this item, it is ordered in for your order, therefore usual delivery timescales do not apply. 

Learn More

• 28 Micron (Performs as 30 Micron.)
• Suitable for use with food.
• Price per pack.
• Range of size available.

Learn More

Ripack 2000 Heat Gun O Ring Learn More

Ripack 2200 Heat Gun O Ring Learn More

Film Unrollers - 450mm

Using a film roller with your L bar heat sealer greatly enhances the production speed and ensures only the required amount of film is used.

Learn More

Film Unrollers - 300mm

Using a film roller with your L bar heat sealer greatly enhances the production speed and ensures only the required amount of film is used.

Learn More

Polyolefin Shrink Film

• 350mm x 1335m
• 15mu
• Centrefolded film

Learn More

Polyolefin Shrink Film

• Use with the L bar heat sealer.
• 300mm x 1070m
• 19mu
• Centrefolded film

Learn More

Polyolefin Shrink Film

• Use with the L bar heat sealer.
• 300mm x 1335m
• 15mu
• Centrefolded film

Learn More

Centrefold Shrink Film 200mm x 600m x 19 Micron

• Price per roll

PVC shrink film is used to wrap products in while on display, this ensures that the purchasing customer receives the goods in pristine condition, devoid of dust, and in a clean condition.

Shrink film offers a pristine item presentation and is used as a tamper deterrent, increasing the time to open a product and showing visible signs of opening an item. The PVC shrink rolls are centrefolded, meaning it is a 200mm wide roll, which will open out to 400mm wide.

Learn More

Hot Air Gun

This heat gun can be used with the L bar heat sealer to shrink the film to the object you are protecting.

The heat gun offers 1600w output and is ideal for use with shrinking small items.

Learn More

Polyolefin Shrink Film

• Use with the L bar heat sealer.
• 250mm x 1335m
• 15mu
• Centrefolded film

Learn More

L Bar Heat Sealer

• Maximum size film 300 x 300mm.
• Use with PVC shrink film.

Learn More

Ripack 115cm Gun Extension

• Suitable for Ripack 2200, and Ripack 3000

A 115cm attachable extension for the Ripack 2200 or Ripack 3000 heat shrink gun models. With the extension, heat shrinking difficult to reach objects will become simpler. Ideal for using with boats, tractors and large machinery.

Learn More

Ripack 203cm Gun Extension

• Suitable for Ripack 2200, and Ripack 3000

A 203cm attachable extension for the Ripack 2200 or Ripack 3000 heat shrink gun models. With the extension, heat shrinking difficult to reach objects will become simpler. Ideal for using with boats, tractors and large machinery.

Learn More

Ripack 106cm Gun Extension

• Suitable for Ripack 2200, and Ripack 3000

A 106cm attachable extension for the Ripack 2200 or Ripack 3000 heat shrink gun models. With the extension, heat shrinking difficult to reach objects will become simpler. Ideal for using with boats, tractors and large machinery.

Learn More

Impulse Heat Sealer Table 190mm Wide

• Convenient, black powder coated metal table with non-slip feet,
• Suitable for PBS economy range of heat sealers.

The heat sealer table is 190mm wide and features non slip feet to ensure the table stays in place when in operation. The heat sealer table is able to increase production rate, reduce operate fatigue and save costs when bag sealing.

The table acts as a support for the contents of the bag, without the operator having to hold the weight of the item.

Learn More

Industrial Glue Gun Used 12mm Hot Melt Sticks Operates 110-250V

• Model p-912-eco
• Powered by a self-regulating PTC heater allowing an adhesive output of up to 1.8kg/hr.
• Tool weighs 450gms.

Learn More

Centrefold Shrink Film 400mm X 600m X 19 Micron

• Price per roll

PVC shrink film is used to wrap products in while on display, this ensures that the purchasing customer receives the goods in pristine condition, devoid of dust, and in a clean condition.

Shrink film offers a pristine item presentation and is used as a tamper deterrent, increasing the time to open a product and showing visible signs of opening an item. The PVC shrink rolls are centrefolded, meaning the mec400-19 is a 400mm wide roll, which will open out to 800mm wide.

To seal the product, use your choice of shrink wrap system or heat shrink gun. Learn More

Piezo Igniter for the Ripack Extension Heat Shrink Gun ONLY

RED BUTTON

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Spares for Impulse Heat Sealer With Cutters 400mm

• Pack Of Consumable Spares For Pbs-400-c
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe/1 Blade

All Spare Parts Available, Contact Sales Department

Learn More

Ripack 3000 Shrink Gun

• Contains -
  • 1 Ripack 3000
  • 1 Securipack
  • 8m hose
  • 1 Combination spanner
  • 1 Instruction manual
  • 1 Year return to base warranty.  

Ripack 3000 heat shrink gun offers 15% reduction in shrink time over the previous heat shrink gun, due to increased power.

Learn More

Front Handle Block for Ripack Heat Shrink Gas Gun

• Front handle block for the Ripack 2000 and the 2200

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Jet Screw for Ripack Heat Shrink Guns

• This Jet Screw is made for Ripack Heat Shrink Gas Guns

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Gas Tap for Ripack Heat Shrink Gas Gun

• This Gas Tap is made for Ripack Heat Shrink Guns 

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Casing Screw for Ripack Heat Shrink Gas Gun

• This Casing Screw is made to fit the Ripack Heat Shrink Gun 

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Body for Ripack 2200 Heat Shrink Gas Gun

Learn More

Left Half Handle for Ripack Heat Shrink Gas Guns

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Right Half Handle for Ripack Heat Shrink Gas Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Trigger for Ripack Heat Shrink Gas Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Trigger Return Spring for Ripack 2200 Heat Shrink Gas Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Complete Neck Casing for the Ripack 2200 Heat Shrink Wrap Gas Gun

• Please note this part is for tools before serial number 09.197868

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Handle Guard for Ripack Heat Shrink Guns

• Handle Guard made for the Ripack 2000 and 2200 Heat Shrink Guns

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Spares for Impulse Heat Sealer With Cutters 200mm

• Pack Of Consumable Spares For Pbs-200-c
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe/1 Blade

All Spare Parts Available, Contact Sales Department

Learn More

Ignition Cable Ring End

• For The Ripack© 2200 Shrink Gun
• This cable has A flat ring which a screw goes through  
• There are two types of cable for the 2200 gun. Please check the type you need

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Multipurpose Hot Melt Adhesive

• 43mm Slugs
• Medium Open Time
• For Plastic, Polystyrene and Textile
• 180-195 Application Temperature
• 5kg Box

Learn More

High Strengh Hot Melt Adhesive

• 43mm Slugs
• Long Open Time
• 180-195 Application Temperature
• 5kg Box

The high strength hotmelt glue slugs are suitable for use in 43mm industrial heat guns. Ideal for use securing plastic, wood, textile, metal and ceramic substrates.

The glue when dry will be yellow.

In each 5kg carton there are approximately 85 glue gun sticks.

Learn More

Pneumatic Spray Glue Gun

• Model p-630
• Pneumatic powered, no operator fatigue.
• 500 watt heater gives output of up to 4.2kgs/Hr using 92-43mm sprayable hot melt with long open time.
• Spray feature is ideal for area coverage and heat sensitive substrates.
• Weighs only 1.4kgs.

Sprayable glue guns are used to seal items together that are sensitive to heat, thus avoiding the surface reacting to the heat. The P-630 glue gun is a sprayable gun that only uses the heat sensitive slugs.

All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

To ensure the best performance from your gun follow these tips:

1. Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
2. The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
3. Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
4. Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
5. Never withdraw a part melted glue cartridge / stick from the back of the gun.
6. Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove

Learn More

Complete Shrink Wrap System With 800mm Seal Bar

• Timer for different shrinkable films
• Safety stand and 1500 watt hot air blower with spreader nozzle
• 6 months return to base warranty

Learn More

Sealer With Shrink Cutting Wire Width 400mm

• Sealer for P400-kit
• 6 months return to base warranty

Sealer With Shrink Cutting Wire Width 400mm

• Sealer for P400-kit
• 6 months return to base warranty

Part of the kit used to shrink wrap individual items, this heat sealer is used to cut and seal the material around the product. To shrink the material additional tools are required though.

Learn More

Complete Shrink Wrap System With 400mm Seal Bar

• Timer for different shrinkable films
• Safety stand and 1500 watt hot air blower with spreader nozzle
• 6 months return to base warranty

Learn More

Spares for Impulse Heat Sealer With Cutters 500mm

• Handy Pack Of Consumable Spares For Pbs-500-c
• Kit With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe/1 Blade

Learn More

Spares for Impulse Heat Sealer With Cutters 300mm

• Pack Of Consumable Spares For Pbs-300-c
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe/1 Blade

All Spare Parts Available, Contact Sales Department

Learn More

Spares for Impulse Heat Sealer Without Cutters 500mm

• Handy Pack Of Consumable Spares For Pbs-500
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe

Learn More

Spares for Impulse Heat Sealer Without Cutters 400mm

• Handy Pack Of Consumable Spares For Pbs-400
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe

Learn More

Spares for Impulse Heat Sealer Without Cutters 300mm

• Pack Of Consumable Spares For Pbs-300
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe

Learn More

Spares for Impulse Heat Sealer Without Cutters 200mm

• Pack Of Consumable Spares For Pbs-200
• With 1 X Element/2 X Upper Ptfe/1 X Lower Ptfe

All Spare Parts Available, Contact Sales Department

Learn More

Hand Held Constant Crimp Heat Sealer

• Features a temperature control for sealing most coated foils.
• Applies a crimped seal 150mm x 15mm,
• Requires 230v and produces 50 watts,
• Weighs 770g

Learn More

Hand Held Constant Heat Sealer

• 150mm x 2mm seal,
• Features an adjustable temperature control for sealing most films up to 2 x 600 gauge.
• Seal 150mm wide x 2mm deep,
• Weighs 650g
• Requires 230v producing 25 Watts.

Learn More

Economy Unroller For Film Width 450mm

• Combine With Packer Easy Sealers And Economy Heat Sealers To Facilitate Film Handling
• Weighs 740g

Heat sealer unrollers are perfect for speeding up production of the packaging process, the unroller can hold a roll of film to the appropriate width, the rolls sits on top of the two cylindrical poles and easily dispenses the film for use in the heat sealer. This reduces the time to produce a bag

 

Learn More

Economy Unroller For 300mm Film

• Combine With Up To 300mm Economy Heat Sealers To Facilitate Film Handling
• Weighs 685g

Heat sealer unrollers are perfect for speeding up production of the packaging process, the unroller can hold a roll of film to the appropriate width, the rolls sits on top of the two cylindrical poles and easily dispenses the film for use in the heat sealer. This reduces the time to produce a bag

Learn More

Impulse Heat Sealer Without Cutters 500mm

• 500mm x 2mm Seal
• 800 Watt power
• Adjustable timer for films up to 2 x 800 gauge layers
• Spares Included
• 12 Month return to base warranty
• Suitable for use with our Polythene Bags

Heat sealers without cutters are used to seal pre-cut bags, using heat to melt two sides of plastic together. To create a strong seal, place the plastic you wish to seal within the heat sealer, and close the handle to melt the plastic and create a seal. Packaging GB offer a range of heat sealer sizes from 200mm up to 500mm.

All Packaging GB's impulse heat sealers have a 12 month return to base warranty, excluding consumable parts and are produced to CE standard.

 

Learn More

Foil Bubble Insulation

• Two layers of foil / two layers of bubble
• 1.2m x 25m

 

Learn More

Foil Bubble Insulation

• Two layers of foil / One layer of bubble
• 600mm X 25m

Learn More

Foil Bubble Insulation

• Two layers of foil / one layer of bubble
• 1.2m X 25m

Learn More

Foil Bubble Insulations 1500mm X 25m

• One Layer Of Foil/One Layer Of Bubble Wrap

Learn More

Foil Bubble Insulations 600mm X 25m

• One Layer Of Foil/One Layer Of Bubble Wrap

Learn More

Foil Bubble Insulations 1.2m X 25m

• One Layer Of Foil/One Layer Of Bubble Wrap

Learn More

Centrefold Shrink Film 300mm x 600m x 19 Micron

• Price per roll

PVC shrink film is used to wrap products in while on display, this ensures that the purchasing customer receives the goods in pristine condition, devoid of dust, and in a clean condition.

Shrink film offers a pristine item presentation and is used as a tamper deterrent, increasing the time to open a product and showing visible signs of opening an item. The PVC shrink rolls are centrefolded, meaning the mec300-19 is a 300mm wide roll, which will open out to 600mm wide.

To seal the product, use your choice of shrink wrap system or heat shrink gun.

Learn More

Centrefold Shrink Film 250mm x 600m x 19 Micron

• Price per roll

PVC shrink film is used to wrap products in while on display, this ensures that the purchasing customer receives the goods in pristine condition, devoid of dust, and in a clean condition.

Shrink film offers a pristine item presentation and is used as a tamper deterrent, increasing the time to open a product and showing visible signs of opening an item. The PVC shrink rolls are centrefolded, meaning the mec250-19 is a 250mm wide roll, which will open out to 500mm wide.

To seal the product, use your choice of shrink wrap system or heat shrink gun. Learn More

Centrefold Shrink Film Roll 

• Width : 1.5m/3m 
• 150 Micron
• Price per 25kg roll
• Approx 59m/roll
• Made in the UK

 

 

 

Learn More

Ripack Heat Shrink Gun Service

• We will call and tell you what the problem is, if you agree to the price we will then fix the problem and return the gun.
• Please note this price is only to service the gun and will not cover the price of the parts.

Learn More

Ripack Heat Shrink Gun Swivel Connector

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Ripack 2000 Ignitor Lead

• Ignitor Lead for the Ripack 2000 Heat Shrink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Ripack 2200 Spark Plug

• This Spark Plug is made for the Ripack 2200 Heat Shrink Gun 

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Ripack - Din 8 metre Hose With Collars And Connections

• 8 mtr hose for Ripack Heat Shrink Gun.
• This part can be used on all Ripack guns.

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Regulator For Ripack 2200 Heat Shrink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Combustion Nozzle for the Ripack 2000 Heat Shink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

 

Learn More

Combustion Nozzle for the Ripack 2200 Shrink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Ripack Ignition Cable for the Ripack© 2200 Shrink Gun

• This cable has a brass feral fitting.
• There are two types of cable for the 2200 gun. Please check the type you need.
• Use this part for serial numbers before 09.197868

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Piezo Igniter for The Ripack© 2000 Shrink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Piezo Igniter for The Ripack© 2200 Heat Shrink Gun

Packaging GB stock a large selection of spare parts for Ripack heat shrink guns, if you can not find the part you are looking for, please contact directly.

Learn More

Packaging GB Heat Shrink Gun MK III

This Shrink Gun Is Manufactured In The Uk For Packaging GB. This Lightweight Shrink Gun Is Ideal For Shrinking Pallet Covers And Centre Fold Shrink Film. The Kit Is Supplied In A Cardboard Box Complete With 8m Hose, Regulator And Oil.
Includes 12 Month Warranty, UK manufactured.

Learn More

Ripack 2500 Heat Shrink Gun

• 1 Securipack- variable pressure regulator with safety valve,
• 1.8 metre propane gas hose.
• 1 Spanner,
• Instruction Booklet,
• 12 Month return to base warranty.
• 34-60kw flat flame

 

 

Learn More

Gussetted shrink tubing

• Ideal for awkward shaped objects or for pallet loads with variable heights.
• 1250/2250mm x 50m per roll,
• 125 microns thick.
• To suit pallet size 1000mm(W) x 1200mm(L) (40"x48")

Gusset shrink tubing fits pallet sizes of 1000mm x 1200mm but the height is determine by the user, by cutting off as required from the 50m roll. This results in the ability to shrink wrap different length items, providing it fits into the circumference.

Select the shrink tubing and determine the height required that corresponds to the size of object or pallet which requires wrapping, and use a heat shrink gun to fit the cover to the contours of the item.

The shrink tubing offers flexibility and provides unusual shaped items with a secure wrapping for transportation or storage. Learn More