PackagingGB

My Cart:

0
You have no items in your shopping cart.

0

Foil Bubble Insulations Products All Made in the UK

Foil Bubble Insulations Products All Made in the UK

Foil Bubble Insulation 

Insulation is key to meeting construction heat loss targets and ensuring buildings are correctly insulated.

Packaging GB sell a selection of bubble and foil lined rolls of insulation, suitable for a range of tasks including wall application. The two materials work to reduce the effect of heat loss by trapping the air.

Condensation Risk - Further calculations on the thermal insulation requirements through a cavity wall should be carried out, check for the risk of condensation within the structure.

6 Item(s)

List  Grid 

  1. Foil Bubble Insulations 600mm X 25m

    Foil Bubble Insulations 600mm X 25m

    • One Layer Of Foil/One Layer Of Bubble Wrap

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £26.90 Incl. Tax: £32.28 As low as: £25.20
    • Buy 5 for £25.00 excl. tax (£30.00 incl. tax) each
    • Buy 10 for £22.50 excl. tax (£27.00 incl. tax) each
    • Buy 20 for £21.00 excl. tax (£25.20 incl. tax) each
  2. Foil Bubble Insulations 1.2m X 25m

    Foil Bubble Insulations 1.2m X 25m

    • One Layer Of Foil/One Layer Of Bubble Wrap

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £53.55 Incl. Tax: £64.26 As low as: £51.24
    • Buy 5 for £48.20 excl. tax (£57.84 incl. tax) each
    • Buy 10 for £42.70 excl. tax (£51.24 incl. tax) each
  3. Foil Bubble Insulations 1500mm X 25m

    Foil Bubble Insulations 1500mm X 25m

    • One Layer Of Foil/One Layer Of Bubble Wrap

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £66.43 Incl. Tax: £79.72 As low as: £60.49
    • Buy 5 for £60.24 excl. tax (£72.29 incl. tax) each
    • Buy 10 for £53.37 excl. tax (£64.04 incl. tax) each
    • Buy 20 for £50.41 excl. tax (£60.49 incl. tax) each
  4. Two Layers Of Foil /One Layer Of Bubble Wrap 600mm X 25m

    Foil Bubble Insulation

    • Two layers of foil / One layer of bubble
    • 600mm X 25m

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £30.00 Incl. Tax: £36.00 As low as: £30.00
    • Buy 5 for £28.00 excl. tax (£33.60 incl. tax) each
    • Buy 10 for £26.00 excl. tax (£31.20 incl. tax) each
    • Buy 20 for £25.00 excl. tax (£30.00 incl. tax) each
  5. Two Layers Of Foil /One Layer Of Bubble Wrap 1.2m X 25m

    Foil Bubble Insulation

    • Two layers of foil / one layer of bubble
    • 1.2m X 25m

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £69.00 Incl. Tax: £82.80 As low as: £70.54
    • Buy 5 for £65.00 excl. tax (£78.00 incl. tax) each
    • Buy 10 for £60.50 excl. tax (£72.60 incl. tax) each
    • Buy 20 for £58.78 excl. tax (£70.54 incl. tax) each
  6. Two Layers Of Foil /Two Layers Of Bubble Wrap 1.2m X 25m

    Foil Bubble Insulation

    • Two layers of foil / two layers of bubble
    • 1.2m x 25m

    - Technical Specification/Properties

     

    Single foil

    Double foil

    Thermal Resistance

     

     

    Bubble

    0.125²K/W

    0.125²K/W

    Cavity

    0.665²K/W

    0.665²K/W

    Total Thermal Resistance

    0.790m²K/2

    1.455m²K/2

    Environmental

    CFC & HCFC Free

    CFC & HCFC Free

    Dimensions

     

     

    Thickness

    4mm

    4mm

    Width

    1050mm/1200mm/1500mm

    1050mm/1200mm/1500mm

    Length

    25m roll

    25m roll

    Foil Tape

    50m x 75mm (24 rolls per box)

    50m x 75mm (24 rolls per box)

     

    Technical Reference

    • Building Regulations 2000 Approved Documents L1 & L2.
    • Building Standards Part J Sept. 2001
    • BRE publication 'Thermal Insulation: Avoiding the risks'.
    • BRE Paper IP12/94 'Assessing the Condensation Risk and Heat Loss at Thermal Bridges Around Openings'.
    • BS EN ISO 6946 : 1997 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method.
    • British Standard References: BS 5250 Control of Condensation in Buildings.
    • Emissivity measured by National Physical Laboratory.
    • Thermal resistance measured by
      Independent Test Laboratories.
    • Tested to BS EN 12153:2000 for water tightness and air permeability.
    • Manufactured in the UK and meeting the requirements of
      BS EN ISO 9002.


    Condensation Risk
    Further to calculating the thermal insulation requirements through a cavity wall, a check should

    be made for predicting the risk of condensation within the structure. This should be determined before use.

     

    Learn More
    Excl. Tax: £86.55 Incl. Tax: £103.86 As low as: £87.48
    • Buy 5 for £79.77 excl. tax (£95.72 incl. tax) each
    • Buy 10 for £76.00 excl. tax (£91.20 incl. tax) each
    • Buy 20 for £72.90 excl. tax (£87.48 incl. tax) each

6 Item(s)

List  Grid