Pneumatic Spray Glue Gun
- Model p-630
- Pneumatic powered, no operator fatigue.
- 500 watt heater gives output of up to 4.2kgs/Hr using 92-43mm sprayable hot melt with long open time.
- Spray feature is ideal for area coverage and heat sensitive substrates.
- Weighs only 1.4kgs.
Sprayable glue guns are used to seal items together that are sensitive to heat, thus avoiding the surface reacting to the heat. The P-630 glue gun is a sprayable gun that only uses the heat sensitive slugs.
All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.
To ensure the best performance from your gun follow these tips:
- Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
- The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
- Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
- Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
- Never withdraw a part melted glue cartridge / stick from the back of the gun.
- Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove