PackagingGB

My Cart:

0
You have no items in your shopping cart.

0

More Views

High Output Glue Gun Operating Temperature, 230v

Excl. Tax: £179.00 Incl. Tax: £214.80
OR

Quick Overview

High Output Glue Gun

  • Model p-543-ECO
  • Up to 3kgs/hr using 43mm hot melt slugs
  • Weighs only 1.15kgs

Glue guns are used to seal items together, this can be sealing closed a cardboard box or gluing two pieces of wood together. The P-543 glue gun is suitable for 43mm glue slugs.

All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

To ensure the best performance from your gun follow these tips:

  1. Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
  2. The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
  3. Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
  4. Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
  5. Never withdraw a part melted glue cartridge / stick from the back of the gun.
  6. Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove

 

You could receive 5 Points for writing a review/rating this product.

Details

High Output Glue Gun - Only available with economy delivery.

  • Model p-543-ECO
  • Up to 3kgs/hr using 43mm hot melt slugs
  • Weighs only 1.15kgs

Glue guns are used to seal items together, this can be sealing closed a cardboard box or gluing two pieces of wood together. The P-543 glue gun is suitable for 43mm glue slugs.

All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

To ensure the best performance from your gun follow these tips:

  1. Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
  2. The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
  3. Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
  4. Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
  5. Never withdraw a part melted glue cartridge / stick from the back of the gun.
  6. Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove

 

Additional Information

SKU p-543-ECO

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You could receive 5 Points for writing a tag for this product