PackagingGB

My Cart:

0
You have no items in your shopping cart.

0

12mm Glue Guns And Glue

12mm Glue Guns And Glue

12mm glue guns are ideal for everyday use where the job is not overly demanding, can be used to seal boxes, paper and craft applications.

Using a glue gun to secure your items will provide a clean adhesive application to sealing items. Glue guns create minimal wastage when used and allow the operator to determine how much glue to use.

Packaging GB sell three 12mm hot melt glue guns for you to choose from, a light use glue gun, a heavy duty glue gun and an adjustable temperature glue gun.

Glue sticks are sold in bulk 5kg quantities, there are three options of glue, fast set, medium set and low melt, please note, the low melt glue can only be used with the P-912-ATC glue gun, because only that gun can operate at a lower temperature too.

All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

Items 1 to 6 of 11 total

Page:
  1. 1
  2. 2

List  Grid 

  1. 12mm Glue Gun

    12mm Glue Gun

    The 12mm glue gun operates at 193C, with a maximum glue output of 8grams a minute. The device is suitable for use with the HGS12 balancing tool, increasing user speed.

    Learn More
    Excl. Tax: £17.90 Incl. Tax: £21.48
  2. Glue Gun Uses 12mm Hot Melt Sticks Operates 100-240V

    Glue Gun Uses 12mm Hot Melt Sticks Operates 100-240V

    • Model P-412
    • 3 minute heat up and dispenses up to 900g/hr
    • Tool weight 250gms.

    Glue guns are used to seal items together, this can be sealing closed a cardboard box or gluing two pieces of board together. The P-412 glue gun is suitable for hot melt 12mm sticks. It has warm up time of 3 minutes with an illuminated on-off switch and is able to dispense 900g/hour.

    All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

    Learn More
    Excl. Tax: £24.50 Incl. Tax: £29.40
  3. Industrial Glue Gun Used 12mm Hot Melt Sticks Operates 110-250V

    Industrial Glue Gun Used 12mm Hot Melt Sticks Operates 110-250V

    • Model p-912-eco
    • Powered by a self-regulating PTC heater allowing an adhesive output of up to 1.8kg/hr.
    • Tool weighs 450gms.

    Glue guns are used to seal items together, this can be sealing closed a cardboard box or gluing two pieces of wood together. The P-912-ECO glue gun is suitable for hot melt 12mm sticks. It has warm up time of 3 minutes with an illuminated on-off switch and is able to dispense 1.8kgs an hour.

    All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

    To ensure the best performance from your gun follow these tips:

    1. Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
    2. The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
    3. Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
    4. Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
    5. Never withdraw a part melted glue cartridge / stick from the back of the gun.
    6. Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove
    Learn More
    Excl. Tax: £47.50 Incl. Tax: £57.00
  4. Glue Gun Industrial Uses 12mm Sticks Operates At 230v

    Glue Gun Industrial Tool Dispenses 12mm Sticks Up To 2.5kgs/hr

    • Model p-912-atc
    • The adjustable temperature control makes this versatile tool suitable for dispensing hot melt, low melt and polyamide adhesive 12mm sticks
    • The powerful 250 watt cartridge heater can dispense adhesive up to 2.5kgs/hr.
    • Tool weighs 500gms

    Glue guns are used to seal items together, this can be sealing closed a cardboard box or gluing two pieces of wood together. The P-912-ATC glue gun is suitable for hot melt, low melt and polyamide 12mm sticks because of the adjustable temperature control that can alter temperature between 130 to 195 C. The glue gun fitted with an illuminated on-off switch is able to dispense 2.5kgs an hour.

    All of our glue guns come with a 12 month return to base warranty as long as our glue is used with the product.

    To ensure the best performance from your gun follow these tips:

    1. Allow the gun to heat up to operating temperature and do not apply force to the trigger before the gun is ready. Most guns are ready in 5-7 minutes, spray guns need at least 10 minutes. A new gun should be loaded with glue before switch-on and the glue gradually pushed through the gun, using light pressure on the trigger, as it heats. This expresses air from the chamber and avoids cold glue melting immediately on contact with the heater housing.
    2. The gun should never be laid on its side, this could cause the glue to “puddle” and cause melt back into the cooler part of the gun. If this happens, the gun could suffer internal damage.
    3. Unplug the gun if it will not be used for 40 minutes or more. To cool the gun more quickly and aid easier start-up the next time it is used, disconnect from the power supply when work is complete and while the gun is cooling use the trigger to extrude about half a cartridge / stick of molten glue through it.
    4. Wipe any excess molten glue from around the nozzle at the end of each work session with a cloth as this will prevent build up of glue deposits which can char. This should be done while the gun is still hot. Always wear protective gloves.
    5. Never withdraw a part melted glue cartridge / stick from the back of the gun.
    6. Never remove the nozzle from a cold gun as thread damage could result. Warm the gun first and always wear protective gloves. Most integral gun stands incorporate a nozzle remove
    Learn More
    Excl. Tax: £89.00 Incl. Tax: £106.80
  5. 12mm Cordless Gas Glue Gun

    12mm Cordless Gas Glue Gun

    • Powered by butane gas cartridges.
    • Includes 2 empty LEC cartridges
    • Cartridges provide 1.5 hours use on average.

     

    Learn More
    Excl. Tax: £65.25 Incl. Tax: £78.30
  6. Cordless Glue Gun - No Battery Included

    Cordless Glue Gun - No Battery Included

    • This is the glue gun only, it requires the battery to operate.
    • 3 minute warm up time
    • Weight - 530g
    Learn More
    Excl. Tax: £74.59 Incl. Tax: £89.51

Items 1 to 6 of 11 total

Page:
  1. 1
  2. 2

List  Grid 

Visit: Sage Epos, IT and Web by CADS Ltd | Swadlincote